This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc. New products
0 Items

Scientific Equipment Company

Cart 0 Items
FlaskScrubber™ Vantage Series 4540031
Share
  1. pin-int
Email Print

FlaskScrubber™ Vantage Series Glassware Washer with Viewing Window and Light, 34.2 to 36.2 H x 32.2 W x 27.5" D

Glassware Washer with Viewing Window and Light, 34.2 to 36.2 H x 32.2 W x 27.5" D, Type 304 Stainless Steel, 230 V, 50/60 Hz, 11 A Electrical Requirements, 20 A Circuit Breaker is Required, Domestic/International, Includes One Spindle Rack

  • Manufacturer Part No: 4540031
  • SECO Part No: 4540031
  • Sold As:
  • Availability: loading

FlaskScrubber® Vantage® Series Glassware Washers have specialized features for contamination-sensitive research. They are designed to wash and dry narrow-neck and general purpose glassware.

Height : 34.2 to 36.2"
Width : 32.2"
Depth : 27.5"
Material (ml/min) : Type 304 Stainless Steel
Maximum Pressure : 20 to 120psi for hot tap water pressure at washer
Flow Rate : 4.7 L/min for hot tap water, 3.4L/min for purified water
Minimum Purified Water Pressure : 0 psi
Water Consumption : 13 L/Fill
Electrical Requirement : 230 V, 50/60 Hz, 11 A, 20 A Circuit Breaker is Required
Electrical Rating : Domestic/international
Recommended Inlet Water Temperature : 60°C
Inlet Water Temperature : 49°C to 93°C
For Use With Application : Ideal for college and university, government, pharmaceutical and industrial labs or any facility utilizing reusable glassware
Includes : One Spindle Rack, Glass Viewing Window, 25 w Interior Light
  • Lower spindle rack, of Type 304 stainless steel, with 36 detachable large spindles for washing narrow-neck glassware, rack accommodates a variety of inserts for holding beakers, culture tubes and other specialty glassware (inserts sold separately)
  • 18 Glassware holders, 36 clips and 10 additional interchangeable small spindles
  • Water temperature reaches 93°C (199°F) to sanitize glassware and for enhanced washing and faster drying
  • LCD information center for customizing cycles and monitoring operation, including internal water temperature (°C or °F)
  • Water recirculation rates of 96 gal/min (363 L/min) when operated on 230 V, 50 Hz models and 112 gal/min (424 L/min) on 230 V, 60 Hz for thorough cleaning
  • Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
  • Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses, built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware
  • Water conductivity monitor to confirm rinse water cleanliness and effective detergent removal, RS-232 port for monitoring washer operation on a user-supplied computer or recorder
  • Automatic liquid detergent dispenser with peristaltic pump
  • Automatic rinse aid dispenser
  • Manual-fill detergent dispenser for powder or liquid detergent
  • Manual-fill rinse solution dispenser
  • Built-in, HEPA-filtered forced air drying through the spindles up to 99 minutes and programmable from 38 to 70°C (100 to 158°F), HEPA filter is 99.97% efficient on particulates 0.3 micron
  • 10 Factory-set cycle programs- rinse only, plastic, glass, glass plus, scientific, scientific plus, intense, intense plus, extreme, and dry only alarms with display for hot glass, please wait, water low, water high, overflow, liquid detergent and rinse aid
  • Two user-set cycle programs, user-set delayed start (up to 8 hours), type 304, brushed stainless steel door, sides, top, tank, upper and lower wash arms
  • Clear tempered safety glass viewing window, LED interior light, One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
  • No center water distribution tower allowing for greater glassware capacity, four leveling feet, 0.37" IPS inlet fitting for hot tap water connection, factory-installed drain hose and band clamp
  • Two year warranty on parts and labor
  • Accommodate optional upper spindle rack with additional wash arm and side release latches (sold separately), accommodate optional SteamScrubber upper and lower racks (sold separately)
  • Approved by CAN/CSA C22.2, CE, ETL, UL

Recently Viewed