This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc. New products
0 Items

Scientific Equipment Company

Cart 0 Items
Tygon® AACUN020
Share
  1. pin-int
Email Print

Tygon® R-3603 Laboratory and Vacuum Tubing, 10/10' L, 0.25 ID x 0.625" OD

Tubing, 10/10' L, 0.625 ID x 1.375" OD, Clear, Tygon, 0.375" Thickness, 1" Minimum Blend Radius, 40 psi Maximum Working Pressure, R-3603 Series, Outstanding Chemical Resistance, Lot-to-lot Consistency, Increases Productivity

  • Manufacturer Part No: AACUN020
  • SECO Part No: SGP-AACUN020
  • Sold As:
  • Availability: loading

Crystal clear and flexible, Tygon® Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils are marked at 3-foot intervals for easy measuring. Tygon® Laboratory Tubing may be safely sterilized by coiling loosely in surgical muslin and autoclaving at 15 psi of steam for 30 minutes. Following initial sterilization, a shrinkage of 2%-4% may be noted. However, no further shrinkage should occur with subsequent sterilizations.

Material (ml/min) : Tygon
Length : 10/10'
Series : R-3603
Color : Clear
Diameter : 0.25 ID x 0.625" OD
Wall Thickness : 0.1875"
Minimum Blend Radius : 0.5"
Maximum Working Pressure : 50 psi at 73°F
Vacuum Rating : 29.9" at 73°F
Durometer Hardness : 55 (Shore A), 15 sec
Tensile Strength : 1,650 psi
Ultimate Elongation : 450%
Specific Gravity : 1.18
Maximum Operating Temperature : 165°F
Tensile Stress : 650 psi at 100% Elongation
Tensile Set : 107%
Packaging Type : Vacuum Unipacs
  • Outstanding chemical resistance
  • Lot-to-lot consistency for reproducible results
  • Increases productivity in peristaltic pumps - outlasts other clear tubing 2 to 1
  • Standard sizes available to hold full vacuum at room temperature
  • Smooth, polished inner wall
  • Non-aging and non-oxidizing
  • Meets FDA CFR part 175.300 criteria
  • General laboratory
  • Analytical instruments
  • Peristaltic and vacuum pumps
  • Ideal for condensers, incubators, desiccators, gas lines and drain lines

Recently Viewed