Tubing, 15 m L, 6 ID x 9 mm OD, Clear, Tygon, 1.5 mm Thickness, 22 mm Minimum Blend Radius, 25 psi Maximum Working Pressure, R-3603 Series, Outstanding Chemical Resistance, Lot-to-lot Consistency, Increases Productivity
Crystal clear and flexible, Tygon® Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils are marked at 3-foot intervals for easy measuring. Tygon® Laboratory Tubing may be safely sterilized by coiling loosely in surgical muslin and autoclaving at 15 psi of steam for 30 minutes. Following initial sterilization, a shrinkage of 2%-4% may be noted. However, no further shrinkage should occur with subsequent sterilizations.
Material (ml/min) | : | Tygon |
Length | : | 15 m |
Series | : | R-3603 |
Color | : | Clear |
Diameter | : | 3 ID x 5 mm OD |
Wall Thickness | : | 1 mm |
Minimum Blend Radius | : | 13 mm |
Maximum Working Pressure | : | 30 psi at 73°F |
Vacuum Rating | : | 29.9" at 73°F |
Durometer Hardness | : | 55 (Shore A), 15 sec |
Tensile Strength | : | 1,650 psi |
Ultimate Elongation | : | 450% |
Specific Gravity | : | 1.18 |
Maximum Operating Temperature | : | 165°F |
Tensile Stress | : | 650 psi at 100% Elongation |
Tensile Set | : | 107% |
Packaging Type | : | Metric Sizes |