Tygon® R-3603 Laboratory and Vacuum Tubing, 7 ID x 10 mm OD, 15 m L
Tubing, 50' L, 0.375 ID x 0.625" OD, Black, Tygon, 0.125" Thickness, 1.125" Minimum Blend Radius, 45 psi Maximum Working Pressure, R-3400 Series, Chemical Resistance, Ozone Resistant,
- Manufacturer Part No: AAC1S1505
- SECO Part No: SGP-AAC1S1505
- Sold As:
-
Availability:
Login to View Your Price
-
List Price :
Crystal clear and flexible, Tygon® Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils are marked at 3-foot intervals for easy measuring. Tygon® Laboratory Tubing may be safely sterilized by coiling loosely in surgical muslin and autoclaving at 15 psi of steam for 30 minutes. Following initial sterilization, a shrinkage of 2%-4% may be noted. However, no further shrinkage should occur with subsequent sterilizations.
| Material (ml/min) | : | Tygon |
| Length | : | 15 m |
| Series | : | R-3603 |
| Color | : | Clear |
| Diameter | : | 7 ID x 10 mm OD |
| Wall Thickness | : | 1.5 mm |
| Minimum Blend Radius | : | 29 mm |
| Maximum Working Pressure | : | 20 psi at 73°F |
| Vacuum Rating | : | 15" at 73°F |
| Durometer Hardness | : | 55 (Shore A), 15 sec |
| Tensile Strength | : | 1,650 psi |
| Ultimate Elongation | : | 450% |
| Specific Gravity | : | 1.18 |
| Maximum Operating Temperature | : | 165°F |
| Tensile Stress | : | 650 psi at 100% Elongation |
| Tensile Set | : | 107% |
| Packaging Type | : | Metric Sizes |
- Outstanding chemical resistance
- Lot-to-lot consistency for reproducible results
- Increases productivity in peristaltic pumps - outlasts other clear tubing 2 to 1
- Standard sizes available to hold full vacuum at room temperature
- Smooth, polished inner wall
- Non-aging and non-oxidizing
- Meets FDA CFR part 175.300 criteria
- General laboratory
- Analytical instruments
- Peristaltic and vacuum pumps
- Ideal for condensers, incubators, desiccators, gas lines and drain lines