SECO Grade 934-AH® High Heat Binderless Borosilicate Glass Microfiber Filter Media, 4.25 cm dia

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are smooth and uniform. This permits their characteristically high flow rates while allowing retention of exceptionally small particles and high load capacity. These characteristics are particularly important in applications involving high concentrations of particulate or gelatinous substances. In choosing the appropriate filter for a specific application, careful consideration should be given to the physical form and concentration of the material to be captured by the filter. Fine porosity, fast flow rate, with a 1.5 µm size particle retention. This material is the standard for volatile suspended solids content and related measurements (Standard methods 2540D and EPA method 160.2). Also widely used in cell harvesting applications and RIA scintillation counting. Binderless borosilicate glass microfiber enables use up to 550°C.

• Fastest flow rate
• High load capacity
• Retention of particles to sub-micron size
• Use in liquid and gaseous filtration
• Inert fiber composition
• Free of binders or additives

• Specification Sheet /ASSETS/DOCUMENTS/ITEMS/EN/AH1100.pdf