Syringe Filter, 0.2 µm Pore Size, 31.9 dia x 25.7 mm, 25 mm dia Membrane, Cellulose Acetate, Light Orange Polypropylene Housing, 650 kPa Maximum Pressure, 3.55 cm2 Filtration Area, With 1 µm Glass Fiber, Autoclavable, Luer-Lock and Luer-Slip Connector
Our syringe filters are made using polypropylene medical-grade housings with luer-lock and luer-slip fittings in compliance with ISO 594-1. Each filter is sealed, using an external ring insert, to maintain the membrane integrity and best performance. Filters are color-coded for easy identification. The certified filters are supplied with a certificate of quality, batch-to-batch, to guarantee product performance and quality. The filters are visually inspected following quality specifications. Each batch of filters is tested for external dimensions, bubble point, filter integrity, water flow rate, UV extractable, and compliance with all technical procedures, manufacturing specifications, and quality controls for release. Tests are performed by an independent laboratory.
| Dimension | : | 31.9 dia x 25.7 mm |
| Membrane Diameter | : | 25 mm |
| Autoclavable | : | Yes |
| Hold-up Volume | : | <120 µl |
| Sample Volume | : | >10 ml |
| Membrane Material | : | Cellulose Acetate |
| Housing Material | : | Polypropylene |
| Filtration Area | : | 3.55 cm2 |
| Maximum Pressure | : | 650 kPa |
| Sterility | : | No |
| Protein Adsorption | : | Low |
| Pore Size | : | 0.2 µm |
| Membrane | : | Cellulose Acetate |
| Operating Temperature | : | 180°C Water |
| With | : | 1 µm Glass Fiber |
| Housing Color | : | Light Orange |
| Bubble Point | : | 350 kPa Water |
| Water Flow Rate | : | 10 ml/min/cm2 |
| Connector Type | : | Luer-Lock and Luer-Slip |
| Weight | : | 3.90 g |