This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc. New products
0 Items

Scientific Equipment Company

Cart 0 Items
DigiTrol II 104A PL624
Share
  1. pin-int
Email Print

DigiTrol II Digital Auto Temperature Control, Type J Thermocouple, 240 V

Digital Auto Temperature Control, 3.375 H x 8 W x 6" D, Foxtip Gray, Charcoal, 0 to 750°C Temperature Range, Type J Thermocouple, 240 V, 2400 w, 10 A, 50/60 Hz Electrical Requirement, Dual 4-digit LED Display

  • Manufacturer Part No: 104A PL624
  • SECO Part No: GCA-104A PL624
  • Sold As:
  • Availability: loading

Our controls feature a digital dual output display for set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy set-up and simple input commands make our controls very "user friendly". This temperature control displays both the setpoint and process temperature and uses the most modern control technology for the best temperature stability. The auto-tune feature minimizes setpoint overshoot and learns your process. Changing your setpoint is easily done with the interface keys. The controller can also perform ramp rate operations to allow the user to slowly raise the process temperature. There are several input types available. This unit comes with a 6' detachable power cord, grid support bracket, which is ideal for fume hood mounting to maximize bench space. This control is a microprocessor-based, digital indicating, automatic temperature control with a single input and a single output. It features an auto-tuning function that allows automatic setting of control parameters with a minimum of user input required. This family of control accepts a type "J", "K", or "T" thermocouple input depending on the model ordered. The control automatically sets the PID parameters through a "learning" sequence in the auto-tuning mode. PID parameters include proportional band, reset/integral and rate/derivative. User-friendly features include automatic LED indicators to aid in monitoring and setup, as well as dual LED displays for process temperature and set point indication. This control automatically stores all information in a non-volatile memory.

Height : 3.375"
Width : 8"
Depth : 6"
Finish : Foxtip Gray, Charcoal
Temperature Range : 0 to 750°C
Thermocouple Type : Type J
Control Type : PID with Auto-tune Algorithm
Temperature Accuracy : ±1°C
Calibration Accuracy : 0.1% of Span
Operating Environment : 0 to 149°F/-18 to 65°C, 0 to 90% Humidity, Non-condensing
Operator Interface : Advance, Infinity, Up-down Keys, Thermocouple Receptacle, 3-wire Load Receptacle
Resolution : 1°
Calibration : °C/°F (User Selectable)
Display : Dual 4-digit LED
Temperature Stability : 0.2°F
Voltage Stability : 0.01% of Span
Voltage : 240 V
Amperage : 10 A
Wattage : 2400 w
Hertz : 50/60 Hz
Weight : 3 lb
Includes : 6' Power Cord, Thermocouple: 0.12" dia x 6" Probe x 48" Leads
  • Solid state relay
  • Control mode: PID control mode (factory default) with auto-tune algorithm, on/off control mode programmable (user programmable), manual control mode (user programmable)
  • Circuit protection
  • Low profile housing
  • Safety feature output is de-energized if sensing device is unplugged or damaged
  • Microprocessor-based, single input, single output
  • Automatic cold junction compensation and break protection for sensor

Recently Viewed