BrandTech Scientific Gauge, 5 x 10-9 to 1 x 10 3 mbar Measuring Limit, For DCP 3000 + MPT 200 Vacuum Pump

The Vacuubrand® DCP 3000 is a fully electronic absolute pressure vacuum gauge for measurements in the rough and fine vacuum range. The DCP 3000 + VSK 3000 uses a capacitive transducer to provide gas independent pressure readings from atmospheric pressure to 0.1 mbar/torr/hPa, while the DCP 3000 + VSP 3000 uses the Pirani principal of thermal conductivity to provide a wide measurement range from atmospheric pressure down to 10-3 mbar. For measurements down to 5 x 10-9 mbar, the DCP 3000 is also available with the combined thermal conductivity/cold cathode (Pirani/Penning) vacuum sensor MPT 200. Vacuu.Bus "plug-and-play" technology allows simultaneous connection of up to eight vacuum sensors (upto four of one type). The displayed pressure can be measured in your choice of units - mbar, hPa, or Torr. Digital and analog displays provide both precise readings and trend indication. A "turn-and-push" jogwheel interface allows for easy navigation of menus. The set includes 100 to 230 V/50 to 60 Hz universal power supply with US, CEE, UK, CH and AUS plugs.

• Separate vent and on/off buttons provide ready access
• A solenoid vent valve can be added to vent the application
• Data logger feature (up to 32,000 values, readout via RS232 port)
• Measurement principle- combined thermal conductivity/cold cathode
• Accuracy 1 x 10-8 to 2 x 10-3 mbar ± 25% 2 x 10-3 to 10 mbar ± 15% 10 to 100 mbar ± 50%